ENGINEER EQUIPMENT INSTRUCTION COMPANY
MARDET FLW SEAL
Marine Corps Detachment, Fort Leonard Wood, MO

The Engineer Equipment Instruction Company (EEIC) provides entry level and career progression training for all Marine Corps engineer equipment and technical engineer occupational specialties.  Students are prepared for the Operating Forces where they become an integral part of the MAGTF.

Looking to access courseware from EEIC?  Use the Training Resource Module in MCTIMS.

Engineer Equipment Repair

Phase 1: Students receive instruction on shop safety, equipment characteristics, capabilities and administration.
Phase 2: Students receive instruction on fundamentals of basic electricity, wiring schematics, components, starting systems and charging systems.
Phase 3: Students receive instruction on fundamentals of diesel engines, disassembly, assembly and diesel engine troubleshooting.
Phase 4: Students receive instruction on fundamentals of hydraulics, cylinders, pumps, valves, accumulators and hydraulic schematics.
Phase 5: Students receive instruction on fundamentals of power trains, torque converters, power-shift transmissions, differentials, axles and final drives.
Phase 6: Students receive instruction on fundamentals of brake systems, air actuated brakes and assisted brakes.
Phases 2-6 are conducted in a inter service environment.

Engineer Equipment Operator

Phase 1: Students receive orientation and instruction on records and forms and shop safety. 
Phase 2: Students receive instruction on crew/organizational level maintenance, safety and fundamentals of operation for the LCRTF 5K forklift. 
Phase 3: Students receive instruction on crew/organizational level maintenance, safety and fundamentals of operation for the MMV fork. 
Phase 4: Students receive instruction on crew/organizational level maintenance, safety and fundamentals of operation for the 624KR TRAM forklift. 
Phase 5: Students receive instruction on crew/organizational level maintenance, safety and fundamentals of operation for the 420E Backhoe Loader. 
Phase 6: Students receive instruction on crew/organizational level maintenance, safety and fundamentals of operation for the MCT 850JR Medium Crawler Tractor. 
Phase 7: Students receive instruction on crew/organizational level maintenance, safety and fundamentals of operation for the D6K Crawler tractor. 
Phase 8: Students receive instruction on crew/organizational level maintenance, safety and fundamentals of operation for the 120M Motorized Road Grader.

Technical Engineering

Phase 1; Students receive orientation. Students receive instruction on manual drafting, building materials and methods of construction.
Phase 2: Students receive instruction on computer aided drafting to include mechanical, dimensional and architectural drafting.
Phase 3: Students receive instruction on vertical control survey. 
Phase 4: Students receive instruction on horizontal control survey.
Phase 5: Students receive instruction on GPS instruments and static control surveying. 
Phase 6: Students receive instruction on site planning to include creating and designing a site plan using computer software.
Phase 7: Students receive instruction on introduction and designing roads. 
Phase 8: Students receive instruction on introduction to buildings and utility layouts.
Phase 9: Students receive instruction on project control.
Phase 10: Students receive instruction on radial surveying.
Phase 11: Students receive instruction on civil design and layout of helicopter landing zone's, runways and staging lots.
Phases 1-8 are conducted in a inter service environment.

Student Waiver

Advanced Engineer Equipment Maintenance

Phase 1: Manage unit training.
Phase 2: Test, Measurement, and Diagnostic Equipment (TMDE).
Phase 3: Publications management  
Phase 4: Maintenance management.
Phase 5: Electrical Systems.
Phase 6: Diesel Engines.
Phase 7: Hydraulics 
Phase 8: Power Trains.                                                                                                                                                                                            Phase 7: Hydraulics 
Phase 8: Power Trains.

Advanced Engineer Equipment Operator

Phase 1: Manage unit training.
Phase 2: Licensing Program
Phase 3: Records and Forms
Phase 4: Production Estimations
Phase 5: GCS-900, Grade Control System (GCS)
Phase 6: MAC-50, All Terrain Crane (ATC)
Phase 7: RT-240v2, Rough Terrain Container Handler (RTCH)
Phase 8: Condtion Inspections/Load Test Procedures 
Phase 9: 621G, Scraper 

Items Needed:

  • Steel Toe Boots (serviceable)
  • Mechanic Gloves (mandatory)
  • Coveralls
  • PT Gear (green/green, running suit, and sweats)
  • Service A uniform (reporting in)
  • Service B or C uniform (seasonal)
  • 2 sets of serviceable woodland MCCUU
  • Gortex top/bottom (mandatory)
  • Cold weather gear (seasonal: watch cap and gloves)
  • Running shoes
  • Combat boots (serviceable)
  • Seasonal appropriate proper civilian attire
  • Reflective belt
  • Note taking gear 
  • 90-day supply of any prescription medication

Engineer Assistant Chief

Phase 1: Students receive orientation and instruction on specific details of horizontal construction design.
Phase 2: Students receive instruction on GCS 900 (grade control system) and integrating design and control data into the GCS 900.
Phase 3: Students receive instruction on projecting a bill of materials, materials estimations and project management to include resources, timelines and construction management.
Phase 4: Students receive instruction on construction of a base camp. Students plan, design and brief a presentation of a real-world project scenario.

Engineer Equipment Chief

Phase 1: Students receive instruction on managing unit training.
Phase 2: Students receive instruction on publication control.
Phase 3: Students receive instruction on licensing program.
Phase 4: Students receive instruction on condition inspections/load test procedures.
Phase 5: Students receive instruction on maintenance management.
Phase 6: Students receive instruction on maintenance operations.
Phase 7: Students receive instruction on math review.
Phase 8: Students receive instruction on military soils.
Phase 9: Students receive instruction on horizontal construction.
Phase 10: Students receive instruction on expedient drainage.
Phase 11: Students receive instruction on production/logistical estimations.
Phase 12: Students receive instruction on construction management.

Items Needed:

  • PT gear (green/green, running suit, and sweats).
  • Service A uniform (reporting in).
  • Service B or C uniform (seasonal).
  • Two sets of serviceable woodland MCCUU.
  • Gortex top/bottom.
  • Cold weather gear (seasonal: watch cap/gloves).
  • Running shoes.
  • Combat Boots (serviceable).
  • Seasonal appropriate proper civilian attire.
  • Reflective belt.
  • Note taking gear.
  • 90-day supply of any prescription medication.
     

Lodging:

Lodging accommodations must be reserved through Defense Travel system (DTS). If lodging is unavailable through DTS, a statement of non-availability will be generated within the system. You must obtain the statement of non-availability prior to reserving off-base lodging. DTS must be approved before checking in.

Ground Transportation:

Hertz Rental Cars 

Post Cab Company

COM: (573) 336-0111

Marine Corps Detachment
1788 Nebraska Ave
Fort Leonard Wood, MO

 

Command Duty Officer (CDO)
COM: (573)337-9628 or (573)596-0131

S-1 Customer Service
COM: (573)-337-4320

Inbound (joins)
COM: (573)-337-9853

Reserve Liaison
COM: (573)-337-9813

Mail Room
COM: (573)-337-4320

Unit Readiness Coordinator
COM: (573)-596-8165

Sexual Assault Responder Coordinator (SARC)
COM: (573)-596-0186 or (573)-337-9632

DOD Safe Helpline
COM: 1-877-995-5247

Company Commander
COM: (573) 596-5424

Company 1stSgt
COM: (573) 596-1446

Company GySgt
COM: (573) 596-5718

Academics Officer
COM: (573) 596-5529

Academics Chief
COM: (573) 596-6782

Academics Programmer
COM: (573) 596-5927

BEEO Course
COM: (573) 596-5231

BEER Course
COM: (573) 596-7186

Tech Course
COM: (573) 596-6183

Chiefs Course
COM: (573) 596-3136

AEEO Course
COM: (573) 596-2629

AEEM
COM: (573) 596-5747

Site Manager
Email: Click here 

 

Students from NCO Operators Course 2-23 conducting a Tandem lift.
Students from NCO Mechanic Course 2-23 troubleshooting the Crane.

EEIC Leadership

Company Commander, Engineer Equipment Instruction Company

Maj Barnard Sabin

Major Sabin graduated from the University of Michigan with a Bachelor of Arts in Near Eastern Studies.  Major Sabin attended Officer Candidate School and was commissioned in May 2010.  After graduating from the Basic School in December of 2010 and the Basic Engineer Officers Course in May 2011, he...

Read Biography

Official Photo

Company 1stSgt, Engineer Equipment Instruction Company

1stSgt Andrew Pontious

First Sergeant Andrew Pontious enlisted in the Marine Corps out of Toledo, Ohio and went on to graduate from Marine Corps Recruit Depot Parris Island in January 2006.  After completing Marine Combat Training and graduating from the Naval Justice School in Newport, Rhode Island, he reported to the...

Read Biography

Official Photo