Marines

Photos

Filter

CLEAR ALL 1478 results found

On April 18, 2016, First Lieutenant Jonathan Lanning Keller, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); measures building dimensions during a vertical construction practical application. These measurements help to ensure that buildings are built on an even surface.

On April 18, 2016, First Lieutenant Jonathan Lanning Keller, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); measures building dimensions during a vertical construction practical application. These measurements help to ensure that buildings are built on an even surface.

Photo by CEO 5-16

On April 21, 2016 members of the Marine Corps Engineer School Motorcycle Mentorship Program participated in a ride to Seven Springs, N.C. The purpose of the club is to promote safe riding practices, share experiences and knowledge amongst various levels of riders, and build camaraderie. Pictured from left to right: Gunnery Sergeant Staci Brown, Master Sergeant Shawn Fowler, Jon Batchelor, Staff Sergeant Dallas Mason, and Staff Sergeant Jordan Tributino.

On April 21, 2016 members of the Marine Corps Engineer School Motorcycle Mentorship Program participated in a ride to Seven Springs, N.C. The purpose of the club is to promote safe riding practices, share experiences and knowledge amongst various levels of riders, and build camaraderie. Pictured from left to right: Gunnery Sergeant Staci Brown, Master Sergeant Shawn Fowler, Jon Batchelor, Staff Sergeant Dallas Mason, and Staff Sergeant Jordan Tributino.

Photo by MCES Motorcycle Club

MajGen. Coglianese and the Marines board a Blackhawk for an aerial tour of Fort Leonard Wood.

MajGen. Coglianese and the Marines board a Blackhawk for an aerial tour of Fort Leonard Wood.

Photo by Sgt Teng Yang

MajGen. Coglianese brief young Marines at CBRN.

MajGen. Coglianese brief young Marines at CBRN.

Photo by Sgt Teng Yang

MGySgt Torres gives MajGen. Coglianese a tour of the Chemical Defense Training Facility.

MGySgt Torres gives MajGen. Coglianese a tour of the Chemical Defense Training Facility.

Photo by Sgt Teng Yang

CWO3 Evanson discuss the employment and way ahead for the Electronic Maintenance Support System with MajGen. Coglianese

CWO3 Evanson discuss the employment and way ahead for the Electronic Maintenance Support System with MajGen. Coglianese

Photo by Sgt Teng Yang

SSgt Staffne assist MajGen. Coglianese with the All Terrian Crane.

SSgt Staffne assist MajGen. Coglianese with the All Terrian Crane.

Photo by Sgt Teng Yang

A Marine attached to the Basic Water Support Technician course 4-16 (BWST 4-16) aboard Marine Corps Engineer School, Camp Lejeune, N.C. familiarizes himself with the characteristics, capabilities, components, and instrumentation of the Tactical Water Purification System (TWPS). The Marine is using an iPad to display the Technical Manual while he identifies component locations and practices operating the TWPS on the actual piece of equipment.

A Marine attached to the Basic Water Support Technician course 4-16 (BWST 4-16) aboard Marine Corps Engineer School, Camp Lejeune, N.C. familiarizes himself with the characteristics, capabilities, components, and instrumentation of the Tactical Water Purification System (TWPS). The Marine is using an iPad to display the Technical Manual while he identifies component locations and practices operating the TWPS on the actual piece of equipment.

Photo by BWST 4-16

A Marine attached to the Basic Refrigeration and Air Conditioning Technician course 2-16 (BRACT 2-16) uses a schematic to help him troubleshoot an Environmental Control Unit (ECU) at Marine Corps Engineer School Courthouse Bay Camp Lejeune, N.C.

A Marine attached to the Basic Refrigeration and Air Conditioning Technician course 2-16 (BRACT 2-16) uses a schematic to help him troubleshoot an Environmental Control Unit (ECU) at Marine Corps Engineer School Courthouse Bay Camp Lejeune, N.C.

Photo by BRACT 2-16

Marines attached to the Basic Engineer Equipment Electrical Systems Technician course 5-16 (BEEEST 5-16) aboard Marine Corps Engineer School, Camp Lejeune, N.C. familiarize themselves with characteristics, capabilities, and components of the Advanced Medium Mobile Power Source (AMMPS). The students will soon transition into their next phase of training in which they will be taught complex courses such as direct and alternating current theory, electrical motors, and solid state devices.

Marines attached to the Basic Engineer Equipment Electrical Systems Technician course 5-16 (BEEEST 5-16) aboard Marine Corps Engineer School, Camp Lejeune, N.C. familiarize themselves with characteristics, capabilities, and components of the Advanced Medium Mobile Power Source (AMMPS). The students will soon transition into their next phase of training in which they will be taught complex courses such as direct and alternating current theory, electrical motors, and solid state devices.

Photo by BEEEST 5-16

Field Medical Training Battalion-East (FMTB-E)Commanding Officer, CAPT Jennifer Smith, leads class 16030 on their first hike. FMTB-E students complete four hikes during their training, 2, 4, 6, and 8 miles long.

Field Medical Training Battalion-East (FMTB-E)Commanding Officer, CAPT Jennifer Smith, leads class 16030 on their first hike. FMTB-E students complete four hikes during their training, 2, 4, 6, and 8 miles long.

Photo by Maria Kirk

On April 14, 2016 Second Lieutenant Thomas Cofer, a Marine attached to Combat Engineer Officer Course 5-16 (CEO 5-16); uses a hammer drill, a tool within the Airfield Damage Repair (ADR) kit; to break up concrete around a spall. Spall repair is an expedient method of repairing runway damage that has not broken through the runway surface.

On April 14, 2016 Second Lieutenant Thomas Cofer, a Marine attached to Combat Engineer Officer Course 5-16 (CEO 5-16); uses a hammer drill, a tool within the Airfield Damage Repair (ADR) kit; to break up concrete around a spall. Spall repair is an expedient method of repairing runway damage that has not broken through the runway surface.

Photo by CEO 5-16

On April 14, 2016 First Lieutenant Jonathan Lanning Keller, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); uses a sledgehammer to break up a spall in the concrete as part of an Airfield Damage Repair (ADR) practical application. Spalls are broken up to ensure that Pavemend concrete will be able to adequately fill the spall without leaving pockets.

On April 14, 2016 First Lieutenant Jonathan Lanning Keller, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); uses a sledgehammer to break up a spall in the concrete as part of an Airfield Damage Repair (ADR) practical application. Spalls are broken up to ensure that Pavemend concrete will be able to adequately fill the spall without leaving pockets.

Photo by CEO 5-16

On April 14, 2016 Second Lieutenant Nicholas Downey, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); mixes Pavemend to repair a spall as part of practical application on Airfield Damage Repair (ADR). Pavemend is a concrete which dries and cures very quickly and can support an aircraft’s weight three hours after being set.

On April 14, 2016 Second Lieutenant Nicholas Downey, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); mixes Pavemend to repair a spall as part of practical application on Airfield Damage Repair (ADR). Pavemend is a concrete which dries and cures very quickly and can support an aircraft’s weight three hours after being set.

Photo by CEO 5-16

Marines attached to Basic Water Support Technician course 3-16 (BWST 3-16) aboard Camp Lejeune, N.C. finish a 72 hour culminating event in the Camp Sweat training area by inventorying a Lightweight Water Purification Unit. During the event the Marines were tested on their ability to operate and maintain the systems outside of a classroom environment.

Marines attached to Basic Water Support Technician course 3-16 (BWST 3-16) aboard Camp Lejeune, N.C. finish a 72 hour culminating event in the Camp Sweat training area by inventorying a Lightweight Water Purification Unit. During the event the Marines were tested on their ability to operate and maintain the systems outside of a classroom environment.

Photo by BWST 3-16

On April 6, 2016 Second Lieutenant Eric Johnson, a Marine attached to Combat Engineer Officer's course 3-16 (CEO 3-16); practices identifying the characteristics of different explosive hazards during an Identification of Explosive Hazards class. The officers are required to be able to identify different characteristics of hazards placed in front of them without the aid of any reference.

On April 6, 2016 Second Lieutenant Eric Johnson, a Marine attached to Combat Engineer Officer's course 3-16 (CEO 3-16); practices identifying the characteristics of different explosive hazards during an Identification of Explosive Hazards class. The officers are required to be able to identify different characteristics of hazards placed in front of them without the aid of any reference.

Photo by CEO 3-16

On April 4, 2016 Gunnery Sergeant Douglas Cullins, a Marine instructor with Combat Engineer Instruction Company; teaches Combat Engineer Officer's course 3-16 (CEO 3-16) how to operate the iRobot Pacbot 510 during their Clearance Assets class.

On April 4, 2016 Gunnery Sergeant Douglas Cullins, a Marine instructor with Combat Engineer Instruction Company; teaches Combat Engineer Officer's course 3-16 (CEO 3-16) how to operate the iRobot Pacbot 510 during their Clearance Assets class.

Photo by CEO 3-16

On April 4, 2016 Second Lieutenants Andrew McDoughall and Michael Land, Marines attending Combat Engineer Officer's course 3-16 (CEO 3-16); practice operating the iRobot Pacbot 510 during Clearance Assets class.

On April 4, 2016 Second Lieutenants Andrew McDoughall and Michael Land, Marines attending Combat Engineer Officer's course 3-16 (CEO 3-16); practice operating the iRobot Pacbot 510 during Clearance Assets class.

Photo by CEO 3-16

Marines attending Utilities Chief course 2-16 (UC 2-16) take their class photo in front of Utilities Instruction Company on April 6, 2016 at Courthouse Bay. Throughout their time attending the course the Marines have learned about field planning, site characteristics, site selection, site set up, electrical and water planning, and the characteristics and capabilities of all utility equipment.

Marines attending Utilities Chief course 2-16 (UC 2-16) take their class photo in front of Utilities Instruction Company on April 6, 2016 at Courthouse Bay. Throughout their time attending the course the Marines have learned about field planning, site characteristics, site selection, site set up, electrical and water planning, and the characteristics and capabilities of all utility equipment.

Photo by UC 2-16

On April 5, 2016 (from left to right) Second Lieutenants Justin Wilkison, Thomas Cofer, Troy Searcy, and Brock Yackey, Marines attending Combat Engineer Officer's course 5-16 (CEO 5-16); practice using the Dynamic Cone Petrometer (DCP). The DCP is used to test for moisture in the soil which helps determine soil suitability for construction.

On April 5, 2016 (from left to right) Second Lieutenants Justin Wilkison, Thomas Cofer, Troy Searcy, and Brock Yackey, Marines attending Combat Engineer Officer's course 5-16 (CEO 5-16); practice using the Dynamic Cone Petrometer (DCP). The DCP is used to test for moisture in the soil which helps determine soil suitability for construction.

Photo by CEO 5-16