Marines

Photos

Filter

CLEAR ALL 1485 results found

USAID/USMC in Nepal

USAID/USMC in Nepal

Photo by USMC

HA/DR in Nepal

HA/DR in Nepal

Photo by Cpl. Isaac Ibarra

HA/DR in Nepal

HA/DR in Nepal

Photo by USMC

Civil Affairs Course 2-16

Civil Affairs Course 2-16

Photo by MCCMOS

CMO Planner Course 3-15

CMO Planner Course 3-15

Photo by MCCMOS

Civil Affairs Course 2-15

Civil Affairs Course 2-15

Photo by MCCMOS

Civil Affairs Course 1-16

Civil Affairs Course 1-16

Photo by MCCMOS

CA Course 3_16

CA Course 3_16

Photo by MCCMOS

On May 4, 2016 Second Lieutenant Nicholas Downey, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); walks across and gains familiarization with the Medium Girder Bridge. Students with CEO 5-16 were given classes on the design, construction, and employment of Marine Corps bridges.

On May 4, 2016 Second Lieutenant Nicholas Downey, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); walks across and gains familiarization with the Medium Girder Bridge. Students with CEO 5-16 were given classes on the design, construction, and employment of Marine Corps bridges.

Photo by CEO 5-16

Lance Corporals Alan Bounyasith and Pablo Flores, Marines attached to Small Craft Mechanics course 3-16 (SCMC 3-16); perform Preventative Maintenance Checks and Services (PMCS) on the Bridge Erection Boat (BEB) as part of a practical application. These students are removing the engine hatches in order to clean and lubricate the hinges.

Lance Corporals Alan Bounyasith and Pablo Flores, Marines attached to Small Craft Mechanics course 3-16 (SCMC 3-16); perform Preventative Maintenance Checks and Services (PMCS) on the Bridge Erection Boat (BEB) as part of a practical application. These students are removing the engine hatches in order to clean and lubricate the hinges.

Photo by SCMC 3-16

Lance Corporal Gilberto Salazarvalladolid, Private First Class Korey Gaver, and Corporal Austin Bernal, Marines attached to Small Craft Mechanics course 3-16 (SCMC 3-16); conduct Preventative Maintenance Checks and Services (PMCS) on the Bridge Erection Boat (BEB) as part of a practical application. These students are replacing the fuel lubricity filter.

Lance Corporal Gilberto Salazarvalladolid, Private First Class Korey Gaver, and Corporal Austin Bernal, Marines attached to Small Craft Mechanics course 3-16 (SCMC 3-16); conduct Preventative Maintenance Checks and Services (PMCS) on the Bridge Erection Boat (BEB) as part of a practical application. These students are replacing the fuel lubricity filter.

Photo by SCMC 3-16

On May 4, 2016 Gunnery Sergeant Timothy Stringer, an instructor with Combat Engineer Instruction Company (CEIC); instructs students of Combat Engineer Officer course 5-16 (CEO 5-16) on standard bridge assembly aboard Camp Lejeune, N.C. Marine Corps Combat Engineers are capable of configuring and assembling these bridge parts to cross a gap. Pictured from left to right are Gunnery Sergeant Timothy Stringer, and Second Lieutenants Brock Yackey, Troy Searcy, Thomas Cofer, and Nicholas Downey.

On May 4, 2016 Gunnery Sergeant Timothy Stringer, an instructor with Combat Engineer Instruction Company (CEIC); instructs students of Combat Engineer Officer course 5-16 (CEO 5-16) on standard bridge assembly aboard Camp Lejeune, N.C. Marine Corps Combat Engineers are capable of configuring and assembling these bridge parts to cross a gap. Pictured from left to right are Gunnery Sergeant Timothy Stringer, and Second Lieutenants Brock Yackey, Troy Searcy, Thomas Cofer, and Nicholas Downey.

Photo by CEO 5-16

On May 4, 2016 Gunnery Sergeant Stringer (front), an instructor with Combat Engineer Instruction Company (CEIC); explains components of the boats used to assemble the improved ribbon bridge to students in the Combat Engineer Officer course 5-16 (CEO 5-16). The improved ribbon bridge gives Marines a variety of means to cross rivers. Students (standing) from left to right First Lieutenant Jonathan Lanning Keller, Second Lieutenants Thomas Cofer, and Troy Searcy.

On May 4, 2016 Gunnery Sergeant Stringer (front), an instructor with Combat Engineer Instruction Company (CEIC); explains components of the boats used to assemble the improved ribbon bridge to students in the Combat Engineer Officer course 5-16 (CEO 5-16). The improved ribbon bridge gives Marines a variety of means to cross rivers. Students (standing) from left to right First Lieutenant Jonathan Lanning Keller, Second Lieutenants Thomas Cofer, and Troy Searcy.

Photo by CEO 5-16

On May 4, 2016 Gunnery Sergeant Timothy Stringer, an instructor with Combat Engineer Instruction Company (CEIC); teaches students of Combat Engineer Officer course 5-16 (CEO 5-16) about the Medium Girder Bridge. The Medium Girder Bridge provides Marines a fast and effective means to cross a wide variety of gaps. Pictured left to right: Gunnery Sergeant Stringer, Second Lieutenants Brock Yackey, Justin Wilkison; First Lieutenant Jonathan Lanning Keller, and Second Lieutenants Thomas Cofer, Troy Searcy, and Nicholas Downey.

On May 4, 2016 Gunnery Sergeant Timothy Stringer, an instructor with Combat Engineer Instruction Company (CEIC); teaches students of Combat Engineer Officer course 5-16 (CEO 5-16) about the Medium Girder Bridge. The Medium Girder Bridge provides Marines a fast and effective means to cross a wide variety of gaps. Pictured left to right: Gunnery Sergeant Stringer, Second Lieutenants Brock Yackey, Justin Wilkison; First Lieutenant Jonathan Lanning Keller, and Second Lieutenants Thomas Cofer, Troy Searcy, and Nicholas Downey.

Photo by CEO 5-16

April 26, 2016 Second Lieutenants Troy Searcy and Justin Wilkison, Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16); level out a 4’x8’ concrete pad using a 2”x6” board and a float as part of concrete construction training at Marine Corps Engineer School, Camp Lejeune, N.C. These techniques help to create a more stable concrete pad by removing air pockets from the concrete.

April 26, 2016 Second Lieutenants Troy Searcy and Justin Wilkison, Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16); level out a 4’x8’ concrete pad using a 2”x6” board and a float as part of concrete construction training at Marine Corps Engineer School, Camp Lejeune, N.C. These techniques help to create a more stable concrete pad by removing air pockets from the concrete.

Photo by CEO 5-16

Staff Sergeant Ashley Smith (Right), an instructor with Utilities Instruction Company; explains to Lance Corporal David Toledo, a Marine from of Los Angeles, CA attached to Basic Refrigeration and Air Conditioning Technician course 3-16 (BRACT 3-16); how to properly flare and bend copper to meet the specifications of the assigned project and fit various diameter connections.

Staff Sergeant Ashley Smith (Right), an instructor with Utilities Instruction Company; explains to Lance Corporal David Toledo, a Marine from of Los Angeles, CA attached to Basic Refrigeration and Air Conditioning Technician course 3-16 (BRACT 3-16); how to properly flare and bend copper to meet the specifications of the assigned project and fit various diameter connections.

Photo by BRACT 3-16

On April 26, 2016 Second Lieutenant Thomas Cofer (Left) and First Lieutenant Jonathan Lanning Keller (Right), Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16); load a 9.5 cubic feet concrete mixer with sand. Students are trained how to use locally sourced materials to make their own concrete mix.

On April 26, 2016 Second Lieutenant Thomas Cofer (Left) and First Lieutenant Jonathan Lanning Keller (Right), Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16); load a 9.5 cubic feet concrete mixer with sand. Students are trained how to use locally sourced materials to make their own concrete mix.

Photo by CEO 5-16

Private First Class Edgar Alcantara from Bronx, NY and Private Kyle Peterson from Athens, AL work on their Leak Proof Connections project that involves combining copper pipe, through the use of flaring and bending the copper; to fit
various diameters.

Private First Class Edgar Alcantara from Bronx, NY and Private Kyle Peterson from Athens, AL work on their Leak Proof Connections project that involves combining copper pipe, through the use of flaring and bending the copper; to fit various diameters.

Photo by BRACT 3-16

On April 26, 2016 Mr. Ken Harris (right), an instructor with Combat Engineer Instruction Company; levels a concrete pad with Second Lieutenant Nicholas Downey (left), a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16). Students use a 2"x6" board to ensure there are no gaps in the concrete.

On April 26, 2016 Mr. Ken Harris (right), an instructor with Combat Engineer Instruction Company; levels a concrete pad with Second Lieutenant Nicholas Downey (left), a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16). Students use a 2"x6" board to ensure there are no gaps in the concrete.

Photo by CEO 5-16

PFC E. Balan is learning how to make popcorn for the upcoming Family Day event that will be taking place on 5May at the base Golf Course.

PFC E. Balan is learning how to make popcorn for the upcoming Family Day event that will be taking place on 5May at the base Golf Course.

Photo by Cpl Paul Costilla, HQCo, MCCES