Marines

Photos

Filter

On April 18, 2016, First Lieutenant Jonathan Lanning Keller, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); measures building dimensions during a vertical construction practical application. These measurements help to ensure that buildings are built on an even surface.

On April 18, 2016, First Lieutenant Jonathan Lanning Keller, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); measures building dimensions during a vertical construction practical application. These measurements help to ensure that buildings are built on an even surface.

Photo by CEO 5-16

On April 22, 2016 Second Lieutenant Troy Searcy, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); conducts a practical application in estimating material requirements for vertical construction at Marine Corps Engineer School aboard Camp Lejeune, N.C. In order to successfully execute a construction project, Combat Engineer Officers must be able to accurately determine the amount of materials needed to perform a construction project.

On April 22, 2016 Second Lieutenant Troy Searcy, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); conducts a practical application in estimating material requirements for vertical construction at Marine Corps Engineer School aboard Camp Lejeune, N.C. In order to successfully execute a construction project, Combat Engineer Officers must be able to accurately determine the amount of materials needed to perform a construction project.

Photo by CEO 5-16

On April 18, 2016 Mr. Jose Velasquez (middle), an instructor with Combat Engineer Instruction Company; assists Second Lieutenant Aaron Graham (left) and First Lieutenant Jonathan Lanning Keller (right), Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16); in leveling a board in their foundation as part of a vertical construction practical application. Leveling the frame ensures the foundation of the building is level.

On April 18, 2016 Mr. Jose Velasquez (middle), an instructor with Combat Engineer Instruction Company; assists Second Lieutenant Aaron Graham (left) and First Lieutenant Jonathan Lanning Keller (right), Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16); in leveling a board in their foundation as part of a vertical construction practical application. Leveling the frame ensures the foundation of the building is level.

Photo by CEO 5-16

On April 15, 2016 Mr. Frank Miller, an instructor with Combat Engineer Instruction Company; instructs Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16) on AM2 matting. AM2 matting is used for hasty damage repairs on runways. Pictured from left to right: Second Lieutenants Aaron Graham, Troy Searcy, Brock Yackey, Thomas Cofer, Nicholas Downey, and Mr. Frank Miller.

On April 15, 2016 Mr. Frank Miller, an instructor with Combat Engineer Instruction Company; instructs Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16) on AM2 matting. AM2 matting is used for hasty damage repairs on runways. Pictured from left to right: Second Lieutenants Aaron Graham, Troy Searcy, Brock Yackey, Thomas Cofer, Nicholas Downey, and Mr. Frank Miller.

Photo by CEO 5-16

On April 21, 2016 members of the Marine Corps Engineer School Motorcycle Mentorship Program participated in a ride to Seven Springs, N.C. The purpose of the club is to promote safe riding practices, share experiences and knowledge amongst various levels of riders, and build camaraderie. Pictured from left to right: Gunnery Sergeant Staci Brown, Master Sergeant Shawn Fowler, Jon Batchelor, Staff Sergeant Dallas Mason, and Staff Sergeant Jordan Tributino.

On April 21, 2016 members of the Marine Corps Engineer School Motorcycle Mentorship Program participated in a ride to Seven Springs, N.C. The purpose of the club is to promote safe riding practices, share experiences and knowledge amongst various levels of riders, and build camaraderie. Pictured from left to right: Gunnery Sergeant Staci Brown, Master Sergeant Shawn Fowler, Jon Batchelor, Staff Sergeant Dallas Mason, and Staff Sergeant Jordan Tributino.

Photo by MCES Motorcycle Club

On April 18, 2016 Second Lieutenants Justin Wilkison and Troy Searcy, Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16); use a plumb bob to establish building lines and to ensure a building is level during vertical construction. Plumb bobs are a tool that date back to Ancient Egypt.

On April 18, 2016 Second Lieutenants Justin Wilkison and Troy Searcy, Marines attached to Combat Engineer Officer course 5-16 (CEO 5-16); use a plumb bob to establish building lines and to ensure a building is level during vertical construction. Plumb bobs are a tool that date back to Ancient Egypt.

Photo by CEO 5-16

MajGen. Coglianese and the Marines board a Blackhawk for an aerial tour of Fort Leonard Wood.

MajGen. Coglianese and the Marines board a Blackhawk for an aerial tour of Fort Leonard Wood.

Photo by Sgt Teng Yang

MGySgt Torres gives MajGen. Coglianese a tour of the Chemical Defense Training Facility.

MGySgt Torres gives MajGen. Coglianese a tour of the Chemical Defense Training Facility.

Photo by Sgt Teng Yang

MajGen. Coglianese brief young Marines at CBRN.

MajGen. Coglianese brief young Marines at CBRN.

Photo by Sgt Teng Yang

SSgt Staffne assist MajGen. Coglianese with the All Terrian Crane.

SSgt Staffne assist MajGen. Coglianese with the All Terrian Crane.

Photo by Sgt Teng Yang

CWO3 Evanson discuss the employment and way ahead for the Electronic Maintenance Support System with MajGen. Coglianese

CWO3 Evanson discuss the employment and way ahead for the Electronic Maintenance Support System with MajGen. Coglianese

Photo by Sgt Teng Yang

Marines attached to the Basic Engineer Equipment Electrical Systems Technician course 5-16 (BEEEST 5-16) aboard Marine Corps Engineer School, Camp Lejeune, N.C. familiarize themselves with characteristics, capabilities, and components of the Advanced Medium Mobile Power Source (AMMPS). The students will soon transition into their next phase of training in which they will be taught complex courses such as direct and alternating current theory, electrical motors, and solid state devices.

Marines attached to the Basic Engineer Equipment Electrical Systems Technician course 5-16 (BEEEST 5-16) aboard Marine Corps Engineer School, Camp Lejeune, N.C. familiarize themselves with characteristics, capabilities, and components of the Advanced Medium Mobile Power Source (AMMPS). The students will soon transition into their next phase of training in which they will be taught complex courses such as direct and alternating current theory, electrical motors, and solid state devices.

Photo by BEEEST 5-16

A Marine attached to the Basic Refrigeration and Air Conditioning Technician course 2-16 (BRACT 2-16) uses a schematic to help him troubleshoot an Environmental Control Unit (ECU) at Marine Corps Engineer School Courthouse Bay Camp Lejeune, N.C.

A Marine attached to the Basic Refrigeration and Air Conditioning Technician course 2-16 (BRACT 2-16) uses a schematic to help him troubleshoot an Environmental Control Unit (ECU) at Marine Corps Engineer School Courthouse Bay Camp Lejeune, N.C.

Photo by BRACT 2-16

A Marine attached to the Basic Water Support Technician course 4-16 (BWST 4-16) aboard Marine Corps Engineer School, Camp Lejeune, N.C. familiarizes himself with the characteristics, capabilities, components, and instrumentation of the Tactical Water Purification System (TWPS). The Marine is using an iPad to display the Technical Manual while he identifies component locations and practices operating the TWPS on the actual piece of equipment.

A Marine attached to the Basic Water Support Technician course 4-16 (BWST 4-16) aboard Marine Corps Engineer School, Camp Lejeune, N.C. familiarizes himself with the characteristics, capabilities, components, and instrumentation of the Tactical Water Purification System (TWPS). The Marine is using an iPad to display the Technical Manual while he identifies component locations and practices operating the TWPS on the actual piece of equipment.

Photo by BWST 4-16

Field Medical Training Battalion-East (FMTB-E)Commanding Officer, CAPT Jennifer Smith, leads class 16030 on their first hike. FMTB-E students complete four hikes during their training, 2, 4, 6, and 8 miles long.

Field Medical Training Battalion-East (FMTB-E)Commanding Officer, CAPT Jennifer Smith, leads class 16030 on their first hike. FMTB-E students complete four hikes during their training, 2, 4, 6, and 8 miles long.

Photo by Maria Kirk

On April 14, 2016 Second Lieutenant Nicholas Downey, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); mixes Pavemend to repair a spall as part of practical application on Airfield Damage Repair (ADR). Pavemend is a concrete which dries and cures very quickly and can support an aircraft’s weight three hours after being set.

On April 14, 2016 Second Lieutenant Nicholas Downey, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); mixes Pavemend to repair a spall as part of practical application on Airfield Damage Repair (ADR). Pavemend is a concrete which dries and cures very quickly and can support an aircraft’s weight three hours after being set.

Photo by CEO 5-16

On April 14, 2016 First Lieutenant Jonathan Lanning Keller, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); uses a sledgehammer to break up a spall in the concrete as part of an Airfield Damage Repair (ADR) practical application. Spalls are broken up to ensure that Pavemend concrete will be able to adequately fill the spall without leaving pockets.

On April 14, 2016 First Lieutenant Jonathan Lanning Keller, a Marine attached to Combat Engineer Officer course 5-16 (CEO 5-16); uses a sledgehammer to break up a spall in the concrete as part of an Airfield Damage Repair (ADR) practical application. Spalls are broken up to ensure that Pavemend concrete will be able to adequately fill the spall without leaving pockets.

Photo by CEO 5-16

On April 14, 2016 Second Lieutenant Thomas Cofer, a Marine attached to Combat Engineer Officer Course 5-16 (CEO 5-16); uses a hammer drill, a tool within the Airfield Damage Repair (ADR) kit; to break up concrete around a spall. Spall repair is an expedient method of repairing runway damage that has not broken through the runway surface.

On April 14, 2016 Second Lieutenant Thomas Cofer, a Marine attached to Combat Engineer Officer Course 5-16 (CEO 5-16); uses a hammer drill, a tool within the Airfield Damage Repair (ADR) kit; to break up concrete around a spall. Spall repair is an expedient method of repairing runway damage that has not broken through the runway surface.

Photo by CEO 5-16

On April 4, 2016 Marines with Combat Engineer Officer's course 5-16 (CEO 5-16) conduct a bite grit test during instruction in Soils and Soils Stabilization at Marine Corps Engineer School aboard Camp Lejeune, N.C. Marines performing this test taste the soil to determine if it is composed of soot or clay which ultimately aids in determining the capabilities of the soil on which a structure is to be built. Pictured from left to right: First Lieutenant Jonathan Lanning Keller and Second Lieutenants Brock Yackey and Troy Searcy.

On April 4, 2016 Marines with Combat Engineer Officer's course 5-16 (CEO 5-16) conduct a bite grit test during instruction in Soils and Soils Stabilization at Marine Corps Engineer School aboard Camp Lejeune, N.C. Marines performing this test taste the soil to determine if it is composed of soot or clay which ultimately aids in determining the capabilities of the soil on which a structure is to be built. Pictured from left to right: First Lieutenant Jonathan Lanning Keller and Second Lieutenants Brock Yackey and Troy Searcy.

Photo by CEO 5-16

Marines attached to Basic Engineer Equipment Electrical Systems Technician course 4-16 (BEEEST 4-16) aboard Camp Lejeune, N.C. conduct practical application on troubleshooting schematics to identify fault codes. Once the fault codes are identified, the Marines can repair the issues on the mobile power source.

Marines attached to Basic Engineer Equipment Electrical Systems Technician course 4-16 (BEEEST 4-16) aboard Camp Lejeune, N.C. conduct practical application on troubleshooting schematics to identify fault codes. Once the fault codes are identified, the Marines can repair the issues on the mobile power source.

Photo by BEEEST 4-16